![[ Polski ]](../../images/POLA001.gif)
![[ Deutsch ]](../../images/GERM001.gif)
Thermal Heat Bridges with AnTherm - News
Current information:
The New AnTherm Version 6 has been released on 1st September 2010.
During the Excursion of "The International Passive House Summer School" to Vienna on 29th July 2010 the workshop named "Vapour Diffusion, Phase Lag and 3D Aspects of Thermal Bridges" will be scheduled.
The Licence Price Calculator gives you the opportunity to configure various variants of AnTherm's license and let it calculate estimated license costs.
AnTherm will join and show at sessions of third german-austrian IBPSA conference "BauSIM 2010 - Building Performance Simulation in a Changing Environment" from 22nd till 24th September 2010 in Vienna/Austria.
The informational session "Calculating Thermal Bridges and Vapour Diffusion with AnTherm" was held in Vienna, on 5th May 2010.
From 15th March 2010 on there is new Product Structure and new Price Schedule - adjustment reflects further development of the March 2010 release of version 5.
The informational session "Calculating Thermal Bridges and Vapour Diffusion with AnTherm" has been held in Vienna on 3rd March 2010.
New Version 5 has been released. Functional extensions for transient, harmonic heat transmission calculations and steady state vapour diffusion calculation (in addition to steady state heat transmission) are available now. The multiprocessor support and visualization performance have been improved and significantly extended.
New updated version 4.81 is available to subscribers of the update-subscription.
AnTherm supported more then 400 guests of the International Passive House Forum in Poznan (Międzynarodowe Forum Budownictwa Pasywnego w Poznaniu, Poland) during sessions held on 20/21.January 2010.
More then 120 guests have attended the informational session "Calculating Thermal Bridges and Vapour Diffusion with AnTherm" in Poznan, 22nd January 2010. and discussed the needed revolution.
The informational session "Calculating Thermal Bridges and Vapour Diffusion with AnTherm" has been held in Berlin, 25th January 2010.
From 23. November 2009 on the new update price schedule applies - adjustment reflects further development of the November 2008 release of version 4.
New updated version 4.78 is available to subscribers of the update-subscription.
The informational session "Calculating Thermal Bridges and Vapour Diffusion with AnTherm" has been held on 20th October 2009 in Vienna and 24th November in Dornbirn/Vorarlberg.
Successfully installation and correct execution of AnTherm on MS Windows 7 (RC1) has been proven.
For the first time the workshop „Advanced use of AnTherm / Heat Bridges / Vapour Diffusion“ was scheduled and held on 17th June 2009 in Vienna.
The training „Introduction to working with AnTherm / Heat Bridges / Vapour Diffusion“ and (for the first time) a workshop „Advanced use of AnTherm / Heat Bridges / Vapour Diffusion“ have been held on 15th and 17th June 2009 in Vienna.
The new optimized, multiprocessor aware version 4.74 is available to the update-subscription subscribers.
Updated information in the "Building Energy Software Tools Directory" provided by the U.S. Department of Energy reflects current version of AnTherm as lately validated conformant to EN ISO 10211:2007 and 10077:2003 standards. From 21. February 2009 on the new update price schedule applies - adjustment reflects further development of the November 2008 release of version 4.
Utilizing multiprocessor/multicore-technology boosts AnTherm to the next level of computational performance. Our supercomputing experience makes desktop workplace being utilized with advanced 3D visualization and highest computing power by taking advantage of today's typical computer architectures.
AnTherm Weblog related to the program, development, thermal heat bridges and vapour diffusion opened at http://antherm.blogspot.com/ .
New updated and optimized version 4.69 is available to subscribers of the update-subscription.
AnTherm conforms to validation requirements of the EN 10077-2:2003 - as two dimensional numerical method for calculation of heat transfer through frames of windows, doors and shutters.
AnTherm conforms to validation requirements of the EN 10211:2007 - as two- and three dimensional, stationary precision method of „Class A“. The new validation replaces the earlier one for the EN ISO 10211-1:1996.
The new, even further improved, version 4 of the program AnTherm is released - including the automatic calculation of Psi-values (linear thermal transmittance correction term) and further tools.
From 18. November 2008 on the new license- and update price schedule applies (see the order form and preice schedule) - adjusted update prices, update-subscription , VAPOUR-Option und DONGLE-License-Option.
Frequently viewed chapter "Basics & Some Theory of AnTherm" can be found within the application's documentation now.
- AnTherm is listed within the Tools-Directory des Energy Information Portal "Energy Efficiency and Renewable Energy" of the US-DOE within the Building Technologies Program .
AnTherm conforms to all requirements of EN ISO 10211-1:1996 which must be fulfilled by any calculation program to be qualified as two- and three dimensional, stationary precision method of „Class A“).
See the Report on AnTherm's calculation results of validation examples required by the EN ISO 10211-1:1996Complete application documentation (the User Manual ) is available online also.
Example videos and result protocols:
Explanation of the 3D Navigation within graphical evaluation (Video, 1' 50'')
- The tour of various graphical analysis evaluations (Video, 16' 14'')
Interested?
Contact
us for more information.
Or try and evaluate the demonstrational version just now!